Burtonsville, MD – March 9, 2010 – New Energy Technologies, Inc. (OTCBB: NENE), developer of MotionPower™ technologies for generating sustainable electricity from the kinetic energy of moving vehicles and SolarWindow™ technologies capable of generating electricity on see-thru glass windows, today announced that engineers have successfully completed the most important engineering and fabrication steps required in the development of the Company’s MotionPower™-Heavy technology for generating electricity from the motion of heavy commercial vehicles, including trucks, long-haul rigs, and buses.
“These engineering advancements enable us to begin in-house tests of the first ever commercial-scale prototype of our MotionPower™-Heavy device, and mark a major development milestone,” explained Mr. Meetesh V. Patel, President and CEO of New Energy Technologies, Inc. “I’m eager to advance these trials to include field-testing in real-world installation sites, similar to field-tests conducted for our MotionPower™-Auto technology for generating electricity from moving cars.”
Earlier, the Company’s MotionPower™-Auto technology underwent durability field-tests at the Four Seasons Hotel in Washington, DC, a prominent Burger King® quick-service franchise during the busy Labor Day long weekend in Hillside, NJ, and a Holiday Inn Express® in Baltimore, MD. These field tests were undertaken following advanced prototyping and in-house testing of the MotionPower-Auto™ system. Following these important field tests, engineers were able to achieve a 25-fold increase in the system’s capacity to capture energy from moving cars and light trucks.
Similarly, engineers anticipate advancing in-house testing of New Energy’s MotionPower™-Heavy technology to include field tests at commercial sites where the motion of heavy trucks, long-haul rigs, and buses can be used to generate sustainable electricity.
New Energy’s MotionPower™-Heavy technology is designed to capture the ‘kinetic energy’ of a heavy commercial vehicle when it comes to a stop. The system subsequently converts this otherwise unused energy into valuable electricity. Kinetic energy is present in a moving vehicle, much like the energy present in a bicycle, which may sometimes continue to ‘roll’ even though it’s no longer being pedaled by the rider. Heavy-duty trucks have up to 25 times more kinetic energy than a typical car traveling at the same speed.
Engineers have worked to design, prototype, and test small-scale prototypes of the Company’s novel MotionPower™-Heavy technology. Commercial-scale development, currently underway, represents the next step in New Energy’s carefully engineered product development program and is a major milestone towards commercialization of the first-of-its-kind, practical vehicle energy harvester.
SolarWindow Technologies, Inc. is a developer of next generation, transparent electricity-generating SolarWindow™ coatings.
SolarWindow™ coatings generate electricity on see-through glass and flexible plastics with colored tints popular to skyscraper glass. Unlike conventional systems, SolarWindow™ can be applied to all four sides of tall towers, generating electricity using natural and artificial light conditions and even shaded areas. SolarWindow™ uses organic materials, which are dissolved into liquid, ideal for low-cost high-output manufacturing; and is the subject of a patent pending technology.
The company’s Proprietary Power Production & Financial Model (Power & Financial Model) uses photovoltaic (PV) modeling calculations that are consistent with renewable energy practitioner standards for assessing, evaluating and estimating renewable energy for a PV project. The Power & Financial Model estimator takes into consideration building geographic location, solar radiation for flat-plate collectors (SolarWindow™ irradiance is derated to account for 360 degree building orientation and vertical installation), climate zone energy use and generalized skyscraper building characteristics when estimating PV power and energy production, and carbon dioxide equivalents. Actual power, energy production and carbon dioxide equivalents modeled may vary based upon building-to-building situational characteristics and varying installation methodologies.
For additional information, please call Ms. Briana L. Erickson toll free at 1-800-213-0689 or visit: www.solarwindow.com.
To receive future press releases via email, please visit:
To view the full HTML text of this release, please visit:
For answers to frequently asked questions, please visit our FAQs page:
Social Media Disclaimer
Investors and others should note that we announce material financial information to our investors using SEC filings and press releases. We use our website and social media to communicate with our subscribers, shareholders and the public about the company, SolarWindowTM technology development, and other corporate matters that are in the public domain. At this time, the company will not post information on social media that could be deemed to be material information unless that information was distributed to public distribution channels first. We encourage investors, the media, and others interested in the company to review the information we post on the company’s website and the social media channels listed below:
* This list may be updated from time to time.
No statement herein should be considered an offer or a solicitation of an offer for the purchase or sale of any securities. This release contains forward-looking statements that are based upon current expectations or beliefs, as well as a number of assumptions about future events. Although SolarWindow Technologies, Inc. (the “company” or “SolarWindow Technologies”) believes that the expectations reflected in the forward-looking statements and the assumptions upon which they are based are reasonable, it can give no assurance that such expectations and assumptions will prove to have been correct. Forward-looking statements, which involve assumptions and describe our future plans, strategies, and expectations, are generally identifiable by use of the words “may,” “will,” “should,” “could,” “expect,” “anticipate,” “estimate,” “believe,” “intend,” or “project” or the negative of these words or other variations on these words or comparable terminology. The reader is cautioned not to put undue reliance on these forward-looking statements, as these statements are subject to numerous factors and uncertainties, including but not limited to adverse economic conditions, intense competition, lack of meaningful research results, entry of new competitors and products, adverse federal, state and local government regulation, inadequate capital, unexpected costs and operating deficits, increases in general and administrative costs, termination of contracts or agreements, technological obsolescence of the company's products, technical problems with the company's research and products, price increases for supplies and components, litigation and administrative proceedings involving the company, the possible acquisition of new businesses or technologies that result in operating losses or that do not perform as anticipated, unanticipated losses, the possible fluctuation and volatility of the company's operating results, financial condition and stock price, losses incurred in litigating and settling cases, dilution in the company's ownership of its business, adverse publicity and news coverage, inability to carry out research, development and commercialization plans, loss or retirement of key executives and research scientists, changes in interest rates, inflationary factors, and other specific risks. There can be no assurance that further research and development will validate and support the results of our preliminary research and studies. Further, there can be no assurance that the necessary regulatory approvals will be obtained or that SolarWindow Technologies, Inc. will be able to develop commercially viable products on the basis of its technologies. In addition, other factors that could cause actual results to differ materially are discussed in the company's most recent Form 10-Q and Form 10-K filings with the Securities and Exchange Commission. These reports and filings may be inspected and copied at the Public Reference Room maintained by the U.S. Securities & Exchange Commission at 100 F Street, N.E., Washington, D.C. 20549. You can obtain information about operation of the Public Reference Room by calling the U.S. Securities & Exchange Commission at 1-800-SEC-0330. The U.S. Securities & Exchange Commission also maintains an Internet site that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the U.S. Securities & Exchange Commission at http://www.sec.gov. The company undertakes no obligation to publicly release the results of any revisions to these forward looking statements that may be made to reflect the events or circumstances after the date hereof or to reflect the occurrence of unanticipated events.